CEN/TS 13778 : 2004
Demolition Machinery (Mobile) - Safety Requirements (Technical Specification).
EN 280 : 2013
Mobile Elevating Work Platforms - Design, Stability, Construction, Safety, Examination and Test.
EN 1175 : 2020
Safety of Industrial Trucks - Electrical/Electronic Requirements.
EN 1175-1 : 1998
Industrial Trucks - Safety - Electrical Requirements for Battery Powered Trucks.
EN 1175-2 : 1998
Industrial Trucks - Safety - Electrical Requirements for Internal Combustion Engined Trucks.
EN 1175-3 : 1998
Industrial Trucks - Safety - Electric Power Transmission System Requirements for Internal Combustion Engined Trucks.
EN 1459-1 : 2017
Rough-terrain Trucks - Safety Requirements and Verification - Part 1 : Variable Reach Trucks.
EN 1755 : 2015
Industrial Trucks - Safety - Operation in Explosive Atmospheres.
EN 12077-2 : 1998
Limiting and Indicating Devices - Cranes Safety - Health and Safety - Part 2.
EN 12096 : 1997
Vibration - Mechanical - Declaration and Verification of Vibration Values.
EN 13309 : 2010
EMC - Construction Equipment - Machines with Internal Power Supply.
EN 14492-2 : 2006
Cranes - Power Driven Winches and Hoists - Part 2 : Power Driven Hoists.
EN 15695-1 : 2009
Cab - Protection Against Hazardous Substances - Part 1 : Cab Classification.
EN 16307-1 : 2013
Industrial Trucks - Safety Requirements and Verification. Part 1 : Supplementary Requirements for Self-propelled Industrial Trucks.
EN 16796-1 : 2016
Energy Efficiency of Industrial Trucks - Test Methods - Part 1 : General.
EN 16796-2 : 2016
Energy Efficiency of Industrial Trucks - Test Methods - Part 2 : Operator Controlled Self-propelled Trucks, Towing Tractors and Burden-carrier Trucks.
EN 16796-3 : 2016
Energy Efficiency of Industrial Trucks - Test Methods - Part 3 : Container Handling Lift Trucks.
EN 62061 : 2005
Electrical, Electronic and Programmable Control Systems - Functional Safety.
EN ISO 3740 : 2000
Noise - Acoustics - Guidelines for the Use of Basic Standards - Sound Power Level.
EN ISO 3744 : 2010
Noise - Acoustics - Sound Power Level Measurement - Engineering Method.
EN ISO 6165 : 2012
Earthmoving Machinery - Basic Types - Identification and Terms and Definitions.
EN ISO 7010 : 2012
Graphical Symbols - Safety Colours and Safety Signs - Registered Safety Signs.
EN ISO 7010 : 2020
Graphical Symbols - Safety Colours and Safety Signs - Registered Safety Signs.
EN ISO 7250-1 : 2010
Basic Human Body Measurements for Technological Design - Part 1: Body Measurement Definitions and Landmarks.
EN ISO 13849-1 : 2015
Controls - Safety Related Parts of Control Systems - Part 1 : General Principles for Design.
EN ISO 13857 : 2008
Safety of Machinery - Safety Distances to Prevent Hazard Zones Being Reached by Upper and Lower Limbs.
EN ISO 14119 : 2013
Safety of Machinery - Interlocking Devices Associated with Guards - Principles for Design and Selection.
EN ISO 18497 : 2018
Agricultural Machinery and Tractors - Safety of Highly Automated Agricultural Machines - Principles for Design.
EN ISO 25119-1 : 2018
Tractors and Machinery - Control System Safety - Part 1 : General Principles for Design.
EN ISO 25119-3 : 2018
Tractors and Machinery - Control System Safety - Part 3 : Series Development, Hardware and Software.
EN ISO 25119-4 : 2018
Tractors and Machinery - Control System Safety - Part 4 : Production, Operation, Modification and Supporting Processes.
ISO/DIS 8811 : 2008
Rollers and Compactors - Terminology and Commercial Specifications (Draft).
ISO/DIS 19014-1 : 2024
Earthmoving Machinery - Functional Safety - Part 1 : Methodology to Determine Safety-related Parts of the Control System and Performance Requirements (Draft).
ISO/DIS 19014-2 : 2024
Earth-moving Machinery - Functional Safety - Part 2 : Design and Evaluation of Hardware and Architecture Requirements for Safety-related Parts of the Control System (Draft).
ISO/DIS 19014-3 : 2024
Earthmoving Machinery - Functional Safety - Part 3 : Environmental Performance and Test Requirements of Electronic and Electrical Components Used in Safety-related Parts of the Control System (Draft).
ISO/DIS 19014-4 : 2024
Earthmoving Machinery - Functional safety - Part 4 : Design and Evaluation of Software and Data Transmission for Safety-related Parts of the Control System (Draft).
ISO/TS 3691-7 : 2011
Industrial Trucks - Safety - Part 7 : Regional Requirements for Countries within the EC.
ISO/TS 3691-8 : 2012
Industrial Trucks - Safety - Part 8 : Regional Requirements for Countries Outside the EC.
ISO/TS 13725 : 2016
Hydraulic Fluid Power - Method for Evaluating the Buckling Load of a Hydraulic Cylinder.
ISO/TS 15143-3 : 2016
Earthmoving Machinery and Mobile Road Construction Machinery - Worksite Data Exchange - Part 3 : Telematics Data.
ISO 2631-5 : 2004
Vibration and Shock - Mechanical - Evaluation of Whole Body Vibration Exposure - Part 5 : Method for Evaluation of Vibration Containing Multiple Shocks.
ISO 3600 : 2015
Tractors and Machinery for Agriculture, Forestry, Lawn and Garden - Operator's Manuals.
ISO 5053-1 : 2015
Industrial Trucks - Terminology and Classification - Part 1 : Types of Industrial Trucks.
ISO 5700 : 2013
Tractors for Agriculture and Forestry - Roll-over Protective Structures - Static Test Method and Acceptance Conditions.
ISO 5766 : 1990
Pallet Stackers and Highlift Platform Trucks - Stability Tests.
ISO 6750 : 2005
Maintenance and Operation - Format and Contents of Manuals.
ISO 7010 : 2019
Graphical Symbols - Safety Colours and Safety Signs - Registered Safety Signs.
ISO 7637-1 : 2015
Road Vehicles - Electrical Disturbances from Conduction and Coupling - Part 1 : Definitions and General Considerations.
ISO 7637-3 : 2007
Road Vehicles - Electrical Disturbances from Conduction and Coupling - Part 3 : Electrical Transient Transmission by Capacitive and Inductive Coupling via Lines other than Supply Lines.
ISO 8178-1 : 2017
Emissions - Internal Combustion Engines - Test Bed Measurement Systems of Gaseous and Particulate Emissions.
ISO 8178-2 : 2008
Emissions - Internal Combustion Engines - Measurement of Exhaust Emissions under Field Conditions.
ISO 8178-3 : 1994
Emissions - Internal Combustion Engines - Measurement of Exhaust Smoke in Steady-State Conditions.
ISO 8643 : 2017
Boom Lowering Control Device - Hydraulic Excavator and Backhoe Loader.
ISO 8759-1 : 1998
Agricultural Tractors - Front Equipment - Part 1 : PTOs and 3 Point Linkage.
ISO 10525 : 1997
Counterbalanced Trucks for Freight Containers 6m plus - Additional Stability Tests.
ISO 10658 : 1996
Industrial Trucks - Stability Tests - Additional for Stacking Trucks with Load Laterally Displaced by Powered Devices.
ISO 10975 : 2009
Auto-guidance Systems - Tractors and Machinery for Agriculture - Safety Requirements.
ISO 11451-1 : 2015
Road Vehicles - Vehicle Test Methods for Electrical Disturbances from Narrowband Radiated Electromagnetic Energy - Part 1 : General Principles and Terminology.
ISO 11451-2 : 2015
Road Vehicles - Vehicle Test Methods for Electrical Disturbances from Narrowband Radiated Electromagnetic Energy - Part 2 : Off-vehicle Radiation Sources.
ISO 11451-4 : 2013
Road Vehicles - Vehicle Test Methods for Electrical Disturbances from Narrowband Radiated Electromagnetic Energy - Part 4 : Bulk Current Injection (BCI).
ISO 11452-1 : 2015
Road Vehicles - Component Test Methods for Electrical Disturbances from Narrowband Radiated Electromagnetic Energy - Part 1 : General Principles and Terminology.
ISO 11452-3 : 2016
Road Vehicles - Component Test Methods for Electrical Disturbances from Narrowband Radiated Electromagnetic Energy - Part 3 : Transverse Electromagnetic (TEM) Cell.
ISO 11452-4 : 2011
Road Vehicles - Component Test Methods for Electrical Disturbances from Narrowband Radiated Electromagnetic Energy - Part 4 : Harness Excitation Methods.
ISO 11471 : 1995
Hydraulic Power Services - Coding of Remote Services and Controls.
ISO 11684 : 1995
Safety Signs and Hazard Pictorials - Tractors, Machinery for Agricultural and Forestry, Powered Lawn and Garden Equipment.
ISO 11783-1 : 2007
Serial Control and Communications Data Network - Standard for Mobile Data Communication - Tractors and Machinery for Agriculture and Forestry.
ISO 11783-2 : 2012
Serial Control and Communications Data Network - Physical Layer - Tractors and Machinery for Agriculture and Forestry.
ISO 11783-3 : 2014
Serial Control and Communications Data Network - Data Link Layer - Tractors and Machinery for Agriculture and Forestry.
ISO 11783-3 : 2018
Tractors and Machinery for Agriculture and Forestry - Serial Control and Communications Data Network - Part 3 : Data Link Layer.
ISO 11783-5 : 2011
Serial Control and Communications Data Network - Network Management - Tractors and Machinery for Agriculture and Forestry.
ISO 11783-6 : 2014
Serial Control and Communications Data Network - Virtual Terminal - Tractors and Machinery for Agriculture and Forestry.
ISO 11783-7 : 2015
Serial Control and Communications Data Network - Implement Messages Application Layer - Tractors and Machinery for Agriculture and Forestry.
ISO 11783-12 : 2014
Serial Control and Communications Data Network - Diagnostics Services - Tractors and Machinery for Agriculture and Forestry.
ISO 11783-13 : 2011
Serial Control and Communications Data Network - File Server - Tractors and Machinery for Agriculture and Forestry.
ISO 11839 : 2010
Machinery for Forestry - Glazing and Panel Materials Used in Operator Enclosures for Protection Against Thrown Sawteeth - Test Method and Performance Criteria.
ISO 13284 : 2003
Forklift Trucks - Fork Arm Extensions and Telescopic Fork Arms.
ISO 13284 : 2022
Forklift Trucks - Fork Arm Extensions and Telescopic Fork Arms.
ISO 13562-2 : 2001
Industrial Variable-Reach Trucks - Part 2 : Additional Stability Tests for Freight Container Handling Trucks.
ISO 13854 : 1996
Safety of Machinery - Minimum Gaps to Avoid Crushing of Parts of the Human Body.
ISO 13854 : 2017
Safety of Machinery - Minimum Gaps to Avoid Crushing of Parts of the Human Body.
ISO 14119 : 2024
Safety of Machinery - Interlocking Devices Associated with Guards - Principles for Design and Selection.
ISO 15871 : 2000
Industrial Trucks - Indicator Lights for Container Handling and Grappler Arm Operations.
ISO 15878 : 2008
Road Construction - Asphalt Pavers - Terminology and Commercial Specifications.
ISO 16001 : 2008
Earthmoving Machinery - Hazard Detection Systems and Visual Aids.
ISO 16368 : 2010
Mobile Elevating Work Platforms - Design, Calculations, Safety Requirements and Test Methods.
ISO 16750-1 : 2018
Road Vehicles - Environmental Conditions and Testing for Electrical and Electronic Equipment - Part 1 : General.
ISO 16750-2 : 2012
Road Vehicles - Environmental Conditions and Testing for Electrical and Electronic Equipment - Part 2 : Electrical Loads.
ISO 16750-3 : 2012
Road Vehicles - Environmental Conditions and Testing for Electrical and Electronic Equipment - Part 3 : Mechanical Loads.
ISO 16750-4 : 2010
Road Vehicles - Environmental Conditions and Testing for Electrical and Electronic Equipment - Part 4 : Climatic Loads.
ISO 16750-5 : 2010
Road Vehicles - Environmental Conditions and Testing for Electrical and Electronic Equipment - Part 5 : Chemical Loads.
ISO 17757 : 2017
Earthmoving Machinery and Mining - Autonomous and Semi-autonomous Machine System Safety.
ISO 22915-2 : 2008
Industrial Trucks - Stability Tests - Part 2 : Counterbalanced Trucks with Mast.
ISO 22915-3 : 2014
Industrial Trucks - Verification of Stability - Reach and Straddle Trucks.
ISO 22915-4 : 2009
Industrial Trucks - Stability Tests - Part 4 : Pallet Stackers, Double Stackers and Order Picking Trucks with Elevating Operator Position.
ISO 22915-5 : 2014
Industrial Trucks - Stability Tests - Part 5 : Single-side-loading Trucks.
ISO 22915-8 : 2008
Industrial Trucks - Stability Tests - Part 8 - Stacking with Mast Tilted Forward.
ISO 22915-8 : 2018
Industrial Trucks - Stability Tests - Part 8 - Stacking with Mast Tilted Forward.
ISO 22915-10 : 2008
Industrial Trucks - Stability Tests - Part 10 - Stacking with Laterally Displaced Load.
ISO 22915-13 : 2012
Industrial Trucks - Stability Tests - Part 13 : Rough-terrain Trucks with Mast.
ISO 22915-21 : 2009
Industrial Trucks - Stability Tests - Part 21 - Order-picking Trucks with Operator Position Elevating Above 1,200mm.
ISO 23308-1 : 2020
Energy Efficiency of Industrial Trucks - Test Methods - Part 1: General.
ISO 23308-2 : 2020
Energy Efficiency of Industrial Trucks - Test Methods - Part 2: Operator Controlled Self Propelled Trucks, Towing and Burden Carrier Trucks.
ISO 23308-3 : 2020
Energy Efficiency of Industrial Trucks - Test Methods - Part 3: Container Handling Lift Trucks.
ISO 25119-1 : 2010
Tractors and Machinery - Control System Safety - Part 1 : General Principles for Design.
ISO 25119-2 : 2010
Tractors and Machinery - Control System Safety - Part 2 : Concept Phase.
ISO 25119-2 : 2019
Tractors and Machinery - Control System Safety - Part 2 : Concept Phase.
ISO 25119-3 : 2010
Tractors and Machinery - Control System Safety - Part 3 : Series Development, Hardware and Software.
ISO 25119-4 : 2010
Tractors and Machinery - Control System Safety - Part 4 : Production, Operation, Modification and Supporting Processes.
prEN 1459-7 : 2017
Rough-terrain Trucks - Safety Requirements and Verification - Part 7 : Test Method and Determination of Noise Emission (Draft).
prEN 14492-1 : 2015
Cranes - Power Driven Winches and Hoists - Part 1 : Power Driven Winches (Draft).
prEN 16666 : 2013
Self-propelled Agricultural Machines - Road Safety - Basic Requirements (Draft).